ViewSonic SC-T25 User Guide - Page 15
Con Servers
View all ViewSonic SC-T25 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
10. Configure: Servers a. Enable VDM3.0 Server, this is used to point the VTOS Device at the PC or Virtual Appliance running VDM3.0. Tick this check box and enter the Name or IP Address and Port number of the VDM3.0 system. If you change the default 5808 Port number here you must also change the port number on VDM3.0 under Edit Settings. b. Time Server, Set the Timezone and Time Server. c. Enable PXE Server, this is used for PXE boot installations of VTOS RePC on many PC's simultaneously. Please see the VDM3.0 User Manual for more details. 8
8
10.
Configure: Servers
a.
Enable VDM3.0 Server, this is used to point the VTOS Device at the PC or
Virtual Appliance running VDM3.0. Tick this check box and enter the Name or
IP Address and Port number of the VDM3.0 system. If you change the default
5808 Port number here you must also change the port number on VDM3.0
under Edit Settings.
b.
Time Server, Set the Timezone and Time Server.
c.
Enable PXE Server, this is used for PXE boot installations of VTOS RePC on
many PC’s simultaneously. Please see the VDM3.0 User Manual for more
details.