ViewSonic SC-T25 User Guide - Page 16
Con Network
View all ViewSonic SC-T25 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
11. Configure: Network The Network Tab is used to configure the Wired and or Wireless interfaces. The default VTOS setting is Wired DHCP, in some cases the DHCP server does not provide the DNS information. In this case you should set DHCP with DNS Override from the drop down box, then manually enter the DNS information in DNS 1 and or DNS 2. A Static IP and DNS can also be entered. If you are using Wireless, uncheck Wired, check Wireless and enter your SSID and Password, we only support WPA/WPA2 Protocol as this is the most secure Wireless Protocol On some devices you may need to reboot to ensure the WiFi mode is working. 9
9
11.
Configure: Network
The Network Tab is used to configure the Wired and or Wireless interfaces. The
default VTOS setting is Wired DHCP, in some cases the DHCP server does not
provide the DNS information. In this case you should set DHCP with DNS Override
from the drop down box, then manually enter the DNS information in DNS 1 and or
DNS 2. A Static IP and DNS can also be entered.
If you are using Wireless, uncheck Wired, check Wireless and enter your SSID and
Password, we only support WPA/WPA2 Protocol as this is the most secure Wireless
Protocol
On some devices you may need to reboot to ensure the WiFi mode is working.