ViewSonic V1250s User Guide - Page 36
Wireless LAN
UPC - 766907040616
View all ViewSonic V1250s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
2 Connect the other end of the cable to either an Ethernet outlet jack or to an RJ-45 port on a UTP concentrator or hub in the network. Cabling Restrictions for Networks The following restrictions should be observed for 100BASE-T networks: • The maximum cable run length should be 100 meters (328 feet). • For 100 Mbps operation, use Category 5 wiring and connections. Consult a Windows® manual for the software installation, configuration, and operation of the network. Wireless LAN Wi-Fi LAN Adapter Your new V1250 comes with a built-in Wireless LAN adapter. This allows you to access and transmit data wirelessly to an access point. Consult your network administrator for instructions on connecting your wireless adapter to the network. Your V1250 is equipped with a Built in Wireless Network adapter. Follow the steps below to set up your wireless connection or contact your network administrator for assistance. 1 Click on Start->Connect to->Wireless Network Connection 2 If this is the first time, a Window will be displayed that shows all available networks. Choose the network name desired and enter the network key on the 2 fields provided (leave blank if network is not encrypted). Click Connect. 3 If there is already a network configured and you want to add more, do Step#1 and a Wireless Connection Status will pop up. 4 Click on Properties and then click the Wireless Networks Tab. 5 If you see the network you want to add on the Available Networks window, click that connection and then Configure. Enter the Network Key and other information if necessary, and then click Okay. 6 If you do not see your network, click Add and enter the necessary information including the Network Name and Keys, and then click Okay. ViewSonic Tablet PC V1250 32