ViewSonic VG700 User Guide - Page 5

Quick Installation Optional: For instructions on wall mounting, see page 5 of this user guide. 1 Connect power cord and AC/DC adapter 2 Connect video cable Make sure both the LCD display and computer are turned OFF Connect the video cable from the LCD display to the computer Macintosh users: Models older than G3 require a Macintosh adapter. Attach the adapter to the computer and plug the video cable into the adapter. To order a ViewSonic Macintosh adapter , contact ViewSonic Customer Support. 3 Turn ON LCD display and computer Turn ON the LCD display, then turn ON the computer. This sequence (LCD display before computer) is important. NOTE: Windows 95, 98 or 2000 users may receive a message asking them to install the INF file. This is on the CD. 4 Insert the ViewSonic Wizard CD into the computer s CD drive Follow the on-screen instructions If your computer does not have a CD-ROM drive, see Customer Support. (1) Wait for the CD-ROM to auto-start. NOTE: If the CD-ROM does not auto-start: double-click on the CD-ROM icon in the Windows Explorer, then double-click on viewsonic.exe. (2) Follow the on-screen instructions. 5 Windows users: Set the timing mode (resolution and refresh rate) Example: 1280 X 1024 @ 60 Hz. For instructions on changing the resolution and refresh rate, see the graphic card s user guide. Installation is complete. Enjoy your new ViewSonic LCD display. To be best prepared for any future customer service needs: print this user guide and write the serial number in or Your Records on page 2. (See back of LCD display.) You can register your product online at the website for your region. See the Customer Support table in this guide. The ViewSonic Wizard CD-ROM also provides an opportunity for you to print the registration form which you may mail or fax to ViewSonic. Back plate AC/DC adapter with power cord AC outlet (wall socket) Audio cable Video cable Computer power cord ViewSonic VG700/VG700b 4