ViewSonic X10-4K User Guide - Page 94
Troubleshoo°ng
View all ViewSonic X10-4K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Troubleshooting This section describes some common problems that you may experience when using the projector. Problem or Issue The projector does not turn on There is no picture The image is blurred The remote control does not work The projector/system is frozen and will not respond Possible Solutions • Ensure the power cord is properly attached to the projector and to the power outlet. • If the cooling process has not completed, please wait until it has finished then try to turn on the projector again. • If the above does not work, try another power outlet or another electrical device with the same power outlet. • Ensure the video source cable is connected properly, and that the video source is turned on. • If the input source is not selected automatically, select the correct source with the Source key on either the projector or the remote control. • Adjusting the Focus Ring will help correctly focus the projection lens. • Ensure the projector and screen are aligned properly. If necessary, adjust the height of the projector as well as the projection angle and direction. • Ensure there are no obstacles between the remote control and projector; and that they are within 8 m (26 ft) of each other. • The batteries may be out of power, please check and replace if necessary. • Using a paper clip, carefully insert it into the Reset button at the rear of the projector to reset the device. 94