Viking 30inch 500 VGBQ Installation Instructions - Page 10

Cutout Dimensions (41" Grill) Gas inlet and power cord location area (12.7 5" cm) (152".7 cm) (712.18"cm) (14002-.12/c4m") (913.46"cm) *Solid bottom support Electrical connection for power supply cord on E-Series to be located on rear wall with a maximum distance of 2' (61.0 cm) beneath solid bottom support. **Access door opening *IMPORTANT Cabinet cutout must have a solid bottom to support the full weight of the unit. **Access Doors sold separately - refer to access door installation instructions for correct dimensions. (1206-.01/c4m") 18 (7.6 3" cm) min. Electrical connection for rotisserie motor (position unit so that the plug is always accessible) (1.2 1c/m2)" 1(1/2.2" cm) Countertop typically requires 1/2" wide by 1/2" deep notch cutout on each side of grill. This allows grill CP to sit back properly in the cutout. Cutout Dimensions (53" Grill) Gas inlet and power cord location area (12.7 5" cm) (152".7 cm) (712.18"cm) (15322-.17/c4m") (913.46"cm) *Solid bottom support Electrical connection for rotisserie motor (position unit so that the plug is always accessible) (7.6 3" cm) min. Electrical connection for power supply cord on E-Series to be located on rear wall with a maximum distance of 2' (61.0 cm) beneath solid bottom support. **Access door opening *IMPORTANT Cabinet cutout must have a solid bottom to support the full weight of the unit. **Access Doors sold separately - refer to access door installation instructions for correct dimensions. (1206-.01/c4m") 19 (1.2 1c/m2)" 1(1/2.2" cm) Countertop typically requires 1/2" wide by 1/2" deep notch cutout on each side of grill. This allows grill CP to sit back properly in the cutout.