Viking AD51620 Outdoor Kitchen Planning Guide - Page 26

COUNTERTOP SIZING GUIDELINES FOR WALL INSTALLATIONS While it is always recommended that field templates be used to exactly determine countertop sizes on outdoor cabinet layouts, the dimensions above, and following rules will be helpful in planning and costing countertop installations: 1. Depth of counter, with a 31/44" nominal overhang, will be 34-31/44" when 4" fillers (VFLR4) are used against house walls. The depth will be 30-31/44" when no fillers are used. Note: Fillers must be used if a grill is installed in the cabinet run. 2. Notches in the countertop front edge (11/42" x 1-11/42") are required at all grill, side burner, and wok burner cutouts. 3. Total width of countertop modules is determined by adding up the width of each cabinet and filler, in the run, and adding 31/44" for each end overhang, and 3/4" for each back panel (if a 90° layout has exposed (island) backs. No dimension should be added for side panels (VSP30), as they fit flush into the cabinet end. 4. Countertop thickness should be 1-11/44". Any thicker countertop will require that grills, wok burners and side burners be shimmed (shims locally supplied), to install flush with the tops. 26