Viking DECU1054BSB Installation Instructions - Page 7

45" W. DECU TOP 45" (114.3 cm) 21" (53.3 cm) 45" W. DECU BURNER BOX 19 11/16" (50.0 cm) Indentification Label Location 42 3/4" (108.6 cm) 1 3/16" (3.0 cm) Hold down bracket (one on each side) 1 3/16" (3.0 cm) 12 INSTALLATION OF HOLD DOWN BRACKET - DECU MODELS Two (2) hold brackets will be provided with your unit. After cooktop has been installed into the countertop, locate the bracket in the slots as needed (Figure 1). Place a bracket in the slots and lower until the bracket catches. (Figure 2). Use the bolt to tighten the cooktop to the countertop. (Figure 3) Slots Figure 1 Mounting bracket Top of cooktop Figure 2 Push into slots and down Figure 3 Countertop 1 1/2" (3.8 cm) Max. thickness bolt Cooktop 1" (2.5 cm) Min. * *There must be a 1" (2.5 cm) clearance under counter on the left and right side of the cooktop for pull down brackets to be attached. Do not install brackets on front and rear of cooktop NOTE: If countertop is less than 1 1/2" (3.8 cm) thick, a filler block will have to be used for bolt to push against. (See figure 4) Figure 4 Filler block 13