Viking DECU1054BSB Installation Instructions - Page 8

Performance Checklist, Final Preparation, Replacement Parts

Get Viking DECU1054BSB PDF manuals and user guides View all Viking DECU1054BSB manuals
Add to My Manuals
Save this manual to your list of manuals

Page 8 highlights

PERFORMANCE CHECKLIST A qualified installer should carry out the following checks: 1. Check top surface elements - glow red when turned on. 2. Check hot surface indicator lights - glow red when corresponding element is hot. Any adjustments necessary that are a result of the installer not following instructions will be the responsibility of the installer, dealer of the end user of this product. FINAL PREPARATION 1. Some stainless steel parts may have a plastic protective wrap which must be peeled off. 2. All stainless steel body parts should be wiped with hot, soapy water and with a liquid cleaner designed for this mate- rial. If buildup occurs, do not use steel wool, abrasive cloths, cleaners, or powders! If it is necessary to scrape stainless steel to remove encrusted materials, soak with hot, wet cloths to loosen the material, then use a wood or nylon scraper. Do not use a metal knife, spatula, or any other metal tool to scrape stainless steel! Scratches are almost impossible to remove. REPLACEMENT PARTS Only authorized replacement parts may be used in performing serivce on the cooktop. Do not repair or replace any part of the appliance unless specifically recommended in the manual. All other servicing should be referred to a qualified technician. 14 15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
14
15
PERFORMANCE CHECKLIST
A qualified installer should carry out the following checks:
1. Check top surface elements - glow red when turned on.
2. Check hot surface indicator lights - glow red when corresponding element is hot.
Any adjustments necessary that are a result of the installer not following instructions will be the responsibility of the in-
staller, dealer of the end user of this product.
FINAL PREPARATION
1. Some stainless steel parts may have a plastic protective wrap which must be peeled off.
2. All stainless steel body parts should be wiped with hot, soapy water and with a liquid cleaner designed for this mate-
rial. If buildup occurs, do not use steel wool, abrasive cloths, cleaners, or powders! If it is necessary to scrape stain-
less steel to remove encrusted materials, soak with hot, wet cloths to loosen the material, then use a wood or nylon
scraper. Do not use a metal knife, spatula, or any other metal tool to scrape stainless steel! Scratches are almost im-
possible to remove.
REPLACEMENT PARTS
Only authorized replacement parts may be used in performing serivce on the cooktop. Do not repair or replace any part
of the appliance unless specifically recommended in the manual. All other servicing should be referred to a qualified
technician.