Viking FDW100WS Use and Care Manual - Page 13

Operating the Dishwasher Delay Start Button This option enables you to start the selected program with a delay of .5 to 9.5 hours. • Delay time is adjusted by pressing the Time Delay button (press several times). • After adjusting the delay time, press the Start/Pause/Cancel button. • Close the door. At the end of the delay set, the program starts automatically. NOTICE During a wash program, the Delay Start option does not function. Operating the Dishwasher Cancellation of a Function To cancel a program while the dishwasher is running: • Open the door gently. • Press and hold Start/Pause/Cancel button for 3 seconds. The indicator light will start flashing. • Close the door. • The dishwasher will drain the water inside the machine for 2 minutes. At the end of the cycle, a beep will sound. You can choose and start a new program. WARNING Depending on the stage of the program you have cancelled, there may be detergent residue or rinse agent inside the machine and on the dishes. Make sure the items in the dishwasher are not used before washing properly. Ingestion or inhalation of detergent or rinse agent may cause serious injury. Avoid contact with skin and eyes and keep children and people in poor health away from these materials. Program Change To change the program selection while the dishwasher is running: • Open the door gently. • Press Start/Pause/Cancel and select a new program. • Press Start/Pause/Cancel again, to start. WARNING Depending on the length of the terminated program, detergent and rinse agent may still be in the dispensers. Ingestion or inhalation of detergent or rinse agent may cause serious injury. Avoid contact with skin and eyes, and keep children and people in poor health away from these materials. Operation Operation 24 25