Viking RDDFF236SS Side Trim Kit - Installation Instructions - Page 2
Specifications - rddff236s
![]() |
View all Viking RDDFF236SS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
Specifications Freestanding Refrigerators Description VCFF/RDDFF236 with side panels/tops/grilles Overall width with side panels Overall height with tops/grilles Cutout width with side panels Cutout height with tops/grilles 35-7/8" (91.1 cm) 73-5/8" (187.0 cm) 36" (91.4 cm) 73-3/4" (187.3 cm) Required Components - Built-In Installation Right Shim Trim Left Shim Trim Grille Adhesive Tape Left Spacer Right Spacer Screws A B Left Side Trim Brackets Right Side Trim 2 Left Hinge Cover Right Hinge Cover Installation - Side Trim and Grille (Built-In Installation) 1 2 Remove screws and hold for replacement. Discard hinge covers. Use hinge covers provided in kit. 3 Remove edge and top of corner cover. 4 B Apply adhesive tape to grille assembly. 5 2 Attach brackets and spacers, included in the kit, to the grille assembly with four B screws. 6 A 1 Remove adhesive backing. Firmly press the grille assembly down so the adhesive adheres to the cabinet. Align grille assembly to front door and position grille on top of unit. Secure the grille brackets to the holes in the hinge plate with two A screws. Once grille assembly is secure, install hinge cover screws back into new hinge covers. Some movement of hinge covers might be needed for mounting brackets to fit. 3
![](/manual_guide/products/viking-rddff236ss-trim-kit-installation-instructions-13da805/2.png)