Viking RDSCG2305BSS Use and Care Manual - Page 21
Replacing Oven Lights, Door Removal
![]() |
View all Viking RDSCG2305BSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Product Care Replacing Oven Lights WARNING ELECTRICAL SHOCK HAZARD Disconnect the electric power at the main fuse or circuit breaker before replacing bulb. WARNING DO NOT touch bulb with bare hands. Clean off any signs of oil from the bulb and handle with a soft cloth. DO NOT touch bulb with bare hands. Clean off any signs of oil from the bulb and handle with a soft cloth. glass light cover 1. Unsnap glass light cover using a screwdriver in the access groove. 2. Firmly grasp light bulb and pull out. access groove 3. Replace with halogen bulb using volt and wattage light requirements listed on glass bulb cover. 4. Replace the light cover by snapping glass cover onto metal box. 5. Reconnect power at the main fuse or circuit breaker. 40 Door Removal WARNING TO PREVENT PERSONAL INJURY Before removing the doors, make sure the pins are properly installed in the hinges. Failure to do so can result in personal injury to hands and/or fingers. 2 1 Open door completely. Place pins, supplied with unit, in pin holes. For personal safety, ONLY use pins supplied with the unit. 3 Remove hinge trim screws and hinge trim. 4 Gently close until pins stop door. Lift door up and out. 41 Product Care
![](/manual_guide/products/viking-rdscg2305bss-use-care-manual-71dc192/21.png)