Viking RDSOE306SS Use and Care Manual - Page 9

Product Controls Oven Features CLEAN OVEN SELF CLEAN SELF CLEAN OVEN LOW UPLPIEGRHTTIMBERDOIL CONV. MANUAL BROIL OFF OFF BAKE CLEAN BAKE TRU CONVEC CONV. BAKE OFF 200 OFF OVEN CLEAN LOWER TIMBEMRDEODIL MAXI BROIL CONV. TRU BAKE CONVEC 300 MINI BROIL HI BROIL COUNPVP. ER OVEN BROIL OVENCFOUNVN.CTIONROAST TEMPERATURE 400 BROIL UPPER OVEN OVEN FUNCTION TEMPERATURE CLEAN BROIL 500 1 2 CLEAN OVEN SELF CLEAN LOW BROIL CLEAONFF SELF CLEAN CONV. BROIL BAKOEFF OVEN TRUBAKE 200 CONVEC CONV. 200 BAKE OFF OFF CLEANUPPER OVEN LIGHT CLEAN LBORWOIELR OVEN LIGHT SET MED BROIL MAXI BROIL CONV. 300 BAKE TRU CONVEC 300 MINI 500 400 500 BROIL HI CBORNOVI.L LOWER OVEN BROIL CONV. OVENRFOUASNTCTION TEMPE4R00ATURE BROIL LOWER OVEN OVEN FUNCTION TEMPERATURE 4 5 8 3 6 7 1. TruConvec™ element (behind baffle) 2. Oven light 3. Oven racks (three upper, three lower) 4. Model/Serial number plate (behind vents) 5. Broil element 6. Bake element 7. Lower oven 8. Meat probe 16 Clocks and Timers Electronic Timing Center The Electronic Timing Center is used to program and control all SET timing functions. It has five display and programming modes that are activated by the four push buttons and the "SET" knob. Both the BAKE TIME mode and the MIN/SEC TIMER mode can be used to time cooking periods. These features can even be used at the same time when both ovens are in use. However, only BAKE TIME and Self-Cleaning modes shut the oven off automatically when the timed program is over. For example, you can time bake a casserole in the upper oven using the BAKE TIME mode, while broiling in the lower oven using the MIN/SEC TIMER. One oven can also be cleaned while timing foods in the other oven using the MIN/SEC TIMER. Setting the Min/Sec Timer The MIN/SEC TIMER is designed for accurate timing and is ideal for baking delicate items such as biscuits, cookies, and popovers, and for precise broiling. The MIN/SEC TIMER can be used at the same time the BAKE TIME or START TIME functions are in use. It can be used for timing up to 24 hours. When setting the timer, the time displayed will increase in 1 minute increments. When the timer counts down to 1 minute, the timer alarm will give two short beeps and the display changes from hours: minutes to seconds only. To program the Min/Sec Timer 1. Press the "MIN/SEC TIMER" button. The timer will display :00 and the word TIMER will be displayed in the lower right corner. 2. Turn the "SET" knob until the desired duration time is displayed. The MIN/SEC TIMER is now programmed. The alarm will sound at the end of the countdown. The program can be canceled anytime by setting the remaining time to :00. To change back to the time-of-day, press the "CLOCK" button. Notice that a small clock will be displayed in the upper right corner to indicate that a program is in progress. The display will return automatically to the MIN/SEC TIMER after a few seconds. 17 Product Controls