Viking RVGR3302 Installation Instructions - Page 14
Leg Installation, Leveling/Adjustments/Alignment
 |
View all Viking RVGR3302 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Leg Installation 1 2 Legs are packed in the cardboard top pack. Note: Legs should be installed near to where appliance is to be used, as they are not secure for long transit. 3 1 1 3 2 Note: It is strongly recommended that a pallet or lift jack be used rather than tilting. Raise unit about a foot. Unscrew temporary legs from couplings. 4 Screw legs into couplings on all four corners. Lower range gently to keep any undue strain from legs and internal mounting hardware. Leveling/Adjustments/Alignment 1 2 Measure the four corners in cutout area to verify if flooring is level. For uneven or sloped floors, level unit with metal shims only, as the adjustment required may exceed the thread available in the leg. 14
-
1 -
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9 -
10 -
11 -
12 -
13 -
14 -
15 -
16 -
17 -
18 -
19 -
20
-
21
-
22
-
23
-
24
 |
 |
14
1
1
1
2
3
2
2
Legs are packed in the cardboard top pack.
Note:
Legs should be installed near to where
appliance is to be used, as they are
not secure for long transit.
Note:
It is strongly recommended
that a pallet or lift jack be used rather than tilting.
Raise unit about a foot.
Unscrew temporary legs
from couplings
.
4
Lower range gently to keep any undue strain from
legs and internal mounting hardware.
3
Screw legs into couplings on all
four corners.
Leg Installation
1
2
Measure the four corners in cutout area to verify if
flooring is level.
For uneven or sloped floors, level unit with
metal shims only, as the adjustment required may exceed the
thread available in the leg.
Leveling/Adjustments/Alignment