Viking RVGR3302 Installation Instructions - Page 18
Final Installation, Connecting Gas & Electric
![]() |
View all Viking RVGR3302 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Connecting Gas & Electric DANGER GAS LEAK HAZARD To avoid risk of personal injury or death; leak testing of the appliance must be conducted according to the manufacturer's instructions. Before placing appliance in operation, always check for gas leaks with soapy water solution. • DO NOT USE AN OPEN FLAME TO CHECK FOR GAS LEAKS. Final Installation 1 Connect gas and electrical. Before placing appliance in operation, always check for gas leaks. This must be performed by your dealer, a qualified licensed plumber, or gas service company. 1 2 Slide range into place. Be sure anti-tip bracket slides into the anti-tip opening. 3 Burner heads and burner caps are packed in the cardboard top pack with the grates. Align burner head on burner base. Place burner cap on burner head. Place grate onto the burner pan. (03.9/58"cm) Check that unit is level side to side and front to back. The side trim must be 3/8" (0.95 cm) above countertop. If unit is not level, repeat Steps 5-7 in "Leveling/Adjustments/Alignment" section. 18
![](/manual_guide/products/viking-rvgr3302-installation-instructions-edaa871/18.png)