Viking RVMHC Installation Instructions - Page 4

Tools Recommended for Installation • Phillips Screwdriver • Electric Drill • 1/2", 5/8" and 3/32" Drill Bits • 1½" Wood Bit or Metal Hole Cutter (if metal cabinet is used) • Saw to cut exhaust opening (if needed) • Protective Drop Cloth for product and range you may also use carton for protection • Scissors • Measure • Pencil • Tape Installation Hardware The INSTALLATION HARDWARE (items 1 - 7) packed with the oven should contain the following: Item 1 2 3 4 5 6 7 Part Name & Code Wood Screw 5 X 35 mm XTSS750P35000 Toggle Bolt 3/6 inch LX-BZ0195WRE0 Top Cabinet Screw 5 X 60 mm XBRS750P60000 Flat Washer 30 mm diameter XWHS750-16300 Grommet LBSHC0040MRE0 Tapping Screw 4 x 12 mm XOTS740P12000 Exhaust Damper Assembly FFTA-B004MRK0 Quantity 6 4 2 2 1 4 1 figure Parts Included Hardware Kit #5450M023-60 Use with metal cabinets. Surround the power cord opening. Cut to fit. Parts shown not to common scale. Basic Specifications Microwave Oven Description VMOR205, CVMOR205, RDMOR206, RVMHC330 Overall Width 29-15/16" (76.0 cm) Overall Height from Bottom 16-11/32" (41.5 cm) Overall Depth from Rear 15-9/32" (38.8 cm) Oven Interior Width Height 17-1/8" 8-1/16" (43.5 cm) Depth (20.5 cm) Overall 13-13/16" (35.1 cm) 1.1 cu. ft. Cutout Width / Height / Depth N/A Electrical Requirements (Single Phase) UL Rating 120VAC/60 Hz CSA Rating 116VAC/60 Hz Max. Amp Usage Microwave UL Rating 1.60 kw 13.2 amps CSA Rating 1.5 kw 13.0 amps Convection UL Rating 1.60 kw 13.2 amps CSA Rating 1.5 kw 13.0 amps Approx. Shipping Wt. 71 lbs. (32.2 kg) E3