Viking TVDR3602GDB Installation Instructions - Page 10
Clearance Dimensions
View all Viking TVDR3602GDB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Clearance Dimensions •This range may be installed directly adjacent to existing 36" (91.4 cm) high base cabinets. IMPORTANT: The side panel MUST be 3/8" (.95 cm) above the adjacent base cabinet countertop. This can be accomplished by raising the unit using the adjustment spindles on the legs. •The range CANNOT be installed directly adjacent to sidewalls, tall cabinets, tall appliances, or other side vertical surfaces above 36" (91.4 cm) high. There must be a minimum of 6" (15.2 cm) side clearance from the range to such combustible surfaces above the 36" (91.4 cm) counter height. •Within the 6" (15.2 cm) side clearance to combustible vertical surfaces above 36" (91.4 cm), the maximum wall cabinet depth must be 13" (33.0 cm) and wall cabinets within this 6" (15.2 cm) side clearance must be 18" (45.7 cm) above the 36" (91.4 cm) high countertop. •Wall cabinets above the range must be a minimum of 36" (15.2 cm) above the range cooking surface for the full width of the range. This minimum height requirement does not apply if a range hood is installed over the cooking surface.* (913.64"cm) 6" min (15.2 cm) 13" max (33.0 cm) 36" min (91.4 cm) 18" min (45.7 cm) 3/8" (0.95 cm) 36" 48" 66" Cutout 36" width (91.4 cm) 48" (121.9 cm) 66-1/8" (168.0 cm) Range Width 35-7/8" (91.1 cm) 47-7/8" (121.6 cm) 66" (167.6 cm) Note: Minimum clearance for back wall 0" WARNING BURN HAZARD To avoid risk of personal injury; the use of cabinets for storage above the appliance may result in a potential burn hazard. Combustible items may ignite, metallic items may become hot and cause burns. If a cabinet storage is to be provided the risk can be reduced by installing a rangehood that projects horizontally a minimum 5" (12.7 cm) beyond the bottom of cabinets. *Note: When a rangehood is installed according to required hood installation, cabinets can be installed directly above the rangehood with no minimum clearance height. Note: Clearances from non-combustible materials are not part of the ANSI Z21.1 scope and not certified by CSA. Clearances to non-combustible materials must be approved by the authority having jurisdiction. 10