Viking VBCV36381 Installation Instructions - Page 22

Installation (DCWH Classic Chimney Wall Hoods) Measure down 1-13/16 (4.6 cm) from desired height of hood and secure 1-1/2" x 3/4" wood strip (not included) to wall using screws provided. Use additional mounting screws to secure hood to wood strip. Slide filter front over front lip. Push filter rear up, then slide back over rear lip. CAUTION: Secure vent hood to wall using screws provided. Make sure mounting screws are secured into frame. Use additional mounting screws and wall anchors, if necessary. CAUTION: If not using a duct cover, using screws provided make sure top mounting screws are secured into soffit or cabinet frame. Use additional mounting screws, if necessary. 42 Slide spacer front over front lip. Push spacer rear up, then slide back over rear lip. Slide filter front over front lip. Push filter rear up, then slide back over rear lip. Duct Cover Option (DCWH Classic Chimney Wall Hoods) Measure distance from ceiling to canopy. 43 Tape to avoid scratching.