Viking VDSC536T Use and Care Manual - Page 16

Oven Functions and Settings Clock Display (General) When AC power is applied (including after a power loss), CLOCK display shows a flashing "12:00" and begins incremental time. Once set, clock is "ON" or "OFF" based on user's last setting. Clock Display SET HR MIN 12:00 AM PM STOP TIMER NO PROBE COOK TIME ON DELAY To turn "ON": If time is off, any key press will turn on TIME display. When range is turned "ON" following the selection of FUNCTION or TEMPERATURE, TIME display turns "ON". To turn "OFF": Turn the range "OFF". If TIME is on display, a second press of "OFF" button will turn off TIME display. Programming Clock (Clock defaults to 12:00 and flashes when first powered up or if power is interrupted.) 1. Press "CLOCK/PROBE" button. The clock display will flash. CLOCK/ PROBE MIN/SEC TIMER COOK TIME STOP TIME OVEN FUNC OVEN TEMP OFF CLEAN/ SETTINGS 2. Toggle "SELECTOR" right to increase or left to decrease to set desired time. Time will scroll in 1 minute increments per individual toggle. If "SELECTOR" is held in either right or left position, time will increase or decrease in 10 minute increments until desired time is reached. Clock automatically rolls from AM to PM. 3. Push in "SELECTOR" to accept time and start timer or after 5 seconds, time will auto-accept. (When clock is set and needs to be changed, press "CLOCK/PROBE" button and follow the two steps above. CLOCK display will flash when activated.) Oven Functions and Settings Temp Display (General) Temperature Setting: 5ºF (2ºC) increments Temperature Display: Actual Temp (PREHEAT ONLY) 1ºF (1ºC) increments Meat Probe Actual Temp 1ºF (1ºC) increments Set Temp (all other cycles) 5ºF (2ºC) increments Note: PREHEAT and MEAT PROBE are the only cycles where actual temperature is displayed. Otherwise display shows only set temperature. Function/Temp Display 00000000 888°8 Operation Operation 30 31