Viking VGCC530 Use and Care Manual - Page 26
Replacing Oven Lights, Door Removal
![]() |
View all Viking VGCC530 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Product Care Replacing Oven Lights WARNING ELECTRICAL SHOCK HAZARD Disconnect the electric power at the main fuse or circuit breaker before replacing bulb. WARNING DO NOT touch bulb with bare hands. Clean off any signs of oil from DANGER the bulb and handle with a soft cloth. DO NOT touch bulb with bare hands. Clean off any signs of oil from the bulb and handle with a soft cloth. glass light cover 1. Unsnap glass light cover DANGER using a screwdriver in the access groove. access 2. Firmly grasp light bulb and groove pull out. CAUTION 3. Replace with halogen bulb using volt and wattage light requirements listed on glass bulb cover. 4. Replace the light cover by CAUTION snapping glass cover onto metal box. 5. Reconnect power at the main fuse or circuit breaker. FOR YOUR SAFETY 50 Door Removal WARNING TO PREVENT PERSONAL INJURY Before removing the doors, make sure the pins are properly installed in the hinges. Failure to do so can result in personal injury to hands and/or fingers. 2 1 Open door completely. Place pin in pin hole. 3 Remove hinge trim screws and hinge trim. 4 Close until pins stop door. Lift door up and out. 51 Product Care
![](/manual_guide/products/viking-vgcc5304bss-use-care-manual-34c96b2/26.png)