Viking VGIB151TNSS Use and Care Manual - Page 3
Lp/propane Fixed Piping Connection, Natural Fixed Piping Connection - direct
View all Viking VGIB151TNSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
NATURAL FIXED PIPING CONNECTION Connection: Operating Pressure: Supply Pressure: Standard Residential 1/2" ID gas service line - 1/2" NPT male with 1/2" flare adapter. 4.0" W.C.P. Nat. 6" to 14" W.C.P. Nat. If in excess of 14" W.C.P., a step-down regulator is required. Check with your local gas utility company or with local codes for instructions on installing gas supply lines. Be sure to check on type and size of run and how deep to bury the lines. If the gas line is too small, the grill will not function properly. To connect the supplied regulator assembly to the incoming flexible gas line, attach with a 1/2" (1.3 cm) female flare adapter to the 1/2" (1.3 cm) male flare adapter on the regulator assembly. Ensure that the regulator arrow points in the direction of the gas flow towards the unit and away from the supply. Attach the regulator assembly to the grill unit by pulling back the female coupler sleeve towards the regulator. Insert the coupler into the male coupler fitting on the grill until the sleeve snaps forward securing the connection. DO NOT forget to place the installer supplied gas valve in an accessible location. NOTE: If using a Viking GSH12 flexible hose, remove the 3/8" flare adapter and attach hose to the 1/2" (1.3 cm) male flare on the regulator assembly. Female coupler sleeve Regulator 1/2" male flare adapter Regulator Assembly Male coupler fitting Installer supplied flexible gas line with 1/2" female flare adapter or Viking GHS12 Installer supplied shut-off valve must be easily accessible LP/PROPANE FIXED PIPING CONNECTION Connection: Operating Pressure: Supply Pressure: Standard Residential 1/2" ID gas service line - 1/2" NPT male with 3/8" flare adapter. 10.0" W.C.P. LP/Propane 11" to 14" W.C.P. LP/Propane If in excess of 14" W.C.P., a step-down regulator is required. Check with your local gas utility company or with local codes for instructions on installing gas supply lines. Be sure to check on type and size of run and how deep to bury the lines. If the gas line is too small, the grill will not function properly. To connect the supplied regulator assembly to the incoming flexible gas line, attach with a 3/8" female flare adapter to the 3/8" male flare adapter to the regulator assembly. Ensure that the regulator arrow points in the direction of the gas flow towards the unit and away from the supply. Attach the regulator assembly to the grill unit with the 3/8" female flare adapter on the regulator assembly to the 3/8" male flare adapter on the grill. DO NOT forget to place the installer supplied gas valve in an accessible location. 3/8" female flare adapter Regulator 3/8" male flare adapter Regulator Assembly 3/8" Male flare adapter Installer supplied flexible gas line with 3/8" female flare adapter or Viking GHS12 Installer supplied shut-off valve must be easily accessible 4 5