Viking VGIC5366BSS Use and Care Manual - Page 19

Product Care Cleaning and Maintenance Brass Parts CAUTION All special ordered brass parts are coated with an epoxy coating. DO NOT USE BRASS CLEANERS OR ABRASIVE CLEANERS ON ANY BRASS PARTS. All brass body parts should be wiped regularly with hot soapy water. When hot soapy water will not do the job, use every day household cleaners that are not abrasive. Broiler Pan and Grid Clean with detergent and hot water. For stubborn spots, use a soapfilled steel wool pad. Oven Racks Clean with detergent and hot water. Stubborn spots can be scoured with a soap-filled steel wool pad. WARNING BURN OR ELECTRICAL SHOCK HAZARD Make sure all controls are OFF and oven is COOL before cleaning. Failure to do so can result in burns or electrical shock. 36 Replacing Oven Lights WARNING ELECTRICAL SHOCK HAZARD Disconnect the electric power at the main fuse or circuit breaker before replacing bulb. WARNING DO NOT touch bulb with bare hands. Clean off any signs of oil from the bulb and handle with a soft cloth. DO NOT touch bulb with bare hands. Clean off any signs of oil from the bulb and handle with a soft cloth. glass light cover 1. Unsnap glass light cover using a screwdriver in the access groove. 2. Firmly grasp light bulb and pull out. access groove 3. Replace with halogen bulb using volt and wattage light requirements listed on glass bulb cover. 4. Replace the light cover by snapping glass cover onto metal box. 5. Reconnect power at the main fuse or circuit breaker. 37 Product Care