Viking VGIC5366BSS Use and Care Manual - Page 20

Door Removal, Door Replacement and Adjustment

Get Viking VGIC5366BSS PDF manuals and user guides View all Viking VGIC5366BSS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 20 highlights

Product Care Door Removal WARNING TO PREVENT PERSONAL INJURY Before removing the doors, make sure the pins are properly installed in the hinges. Failure to do so can result in personal injury to hands and/or fingers. 2 1 Open door completely. Place pin in pin hole. 3 Remove hinge trim screws and hinge trim. 4 Close until pins stop door. Lift door up and out. 38 Door Replacement and Adjustment 1 2 Reinstall door to range. 3 Open door completely. Reinstall hinge trim. 4 Remove pins from hole in hinges. 5 Close door. If the door needs to be adjusted, loosen hinge trim screws located in step 2. Adjust the screws located between the door and kickplate using a 5/32" hex head allen wrench. After adjustment, tighten hinge trim screws. 39 Product Care

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
38
39
Product Care
Door Removal
Door Replacement and Adjustment
1
2
3
4
Open door completely.
Place pin in pin hole.
Remove hinge trim screws
and hinge trim.
Close until pins stop door.
Lift door up and out.
Product Care
WARNING
TO PREVENT
PERSONAL INJURY
Before removing the doors,
make sure the pins are
properly installed in the hinges.
Failure to do so can result in
personal injury to hands
and/or fingers.
1
2
3
4
Reinstall door to range.
Open door completely.
Reinstall hinge trim.
Remove pins from hole in hinges.
5
If the door needs to be adjusted, loosen
hinge trim screws located in step 2. Adjust
the screws located between the door
and kickplate using a 5/32” hex head
allen wrench. After adjustment,
tighten hinge trim screws.
Close door.