Viking VIRB364RSS Installation Instructions - Page 29
Hinge Adjustment
![]() |
View all Viking VIRB364RSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Hinge Adjustment 5 2 1 Remove 4 side screws and remove unit top. 7 1 2 Replace unit top. Replace 4 side screws. 8a 6 Front of unit 2 1 3 Loosen the 4 hinge screws. Adjust door. Retighten 4 hinge screws. 8b Wall 2x4 Refrigerator Attach a single 2 x 4 to wall stud (refer to dimensions page for exact location). Wall 2x4 Refrigerator If needed, depending on cabinet and depth, attach second 2 x 4 to first 2 x 4. 56 9 10a 3" Plug in power cord to verify operation. Note: Make sure power switch and showroom switch are in the "On" Position. 10b Place unit within 3" of being flush with cabinets. Note: To avoid cabinet damage, place cardboard between cabinets and unit. When moving unit, do not crimp, kink or crush water supply line. 11 Carefully move unit until semi flush with cabinet (depending on unit). 12 Pull supply tubing forward under unit. Note: DO NOT use plastic water lines. 13 Flush water line by running two quarts of water into a bucket. Turn water off. Connect supply tube to water valve using a 1/2" wrench. Note: DO NOT overtighten. 57
![](/manual_guide/products/viking-vcrb304rss-installation-instructions-3a05c87/29.png)