Viking VIRB364RSS Installation Instructions - Page 31

Performance Checklist

Get Viking VIRB364RSS PDF manuals and user guides View all Viking VIRB364RSS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 31 highlights

25 26 Open door. Display should flash. Press "ACTIVATE CONTROLS" button pad and close door. Note: There is a 6 minute delay before the unit starts. Performance Checklist h Verify cabinet size. h Verify electrical supply and water supply (if applicable). h Install anti-tip device(s) and verify unit is secure. h Position unit in cutout, level at desired height, and secure unit. h Plug-in unit and verify operation. h Connect water supply (if applicable). • Verify icemaker fill tube is properly inserted. • Verify icemaker bailarm is down. • Verify dispenser operation (if applicable). h Align/square door(s). h Verify drain pan is properly installed and there are no leaks in water connection. h Install kickplate. h Remove internal packaging and labels and wipe unit down. Installer's information: Installer's name Installer's company Date 60 61

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
Performance Checklist
61
h
Verify cabinet size.
h
Verify electrical supply and water supply
(if applicable).
h
Install anti-tip device(s) and verify unit is
secure.
h
Position unit in cutout, level at desired
height, and secure unit.
h
Plug-in unit and verify operation.
h
Connect water supply (if applicable).
• Verify icemaker fill tube is properly
inserted.
• Verify icemaker bailarm is down.
• Verify dispenser operation
(if applicable).
h
Align/square door(s).
h
Verify drain pan is properly installed and
there are no leaks in water connection.
h
Install kickplate.
h
Remove internal packaging and labels
and wipe unit down.
Installer’s information:
Installer’s name:
_____________________________
Installer’s company:
_________________________
Date: ________________________________________
60
Open door. Display should flash.
Press “ACTIVATE CONTROLS” button pad and close
door.
Note:
There is a 6 minute delay before the unit starts.
25
26