Viking VIRB364RSS Installation Instructions - Page 30
Kickplate Installation, Door Stop Adjustment, Final Installation
View all Viking VIRB364RSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
14 15 Turn on water supply and check for leaks. 16 Lift unit off rollers to desired height and level unit using a 5/16" head wrench. Note: DO NOT use an electric device. Overtightening can cause damage. 17 Screw Wall 2x4 Refrigerator Attach positive secure self-tapping bolts to 2 x 4 using a 22" extension. Kickplate Installation 18 1 Verify that drain pan is installed and aligned. 19 2 2 3 Align holes on both ends of louvered panels and insert screws. Using a Phillips screwdriver, attach the kickplate to the unit and adjust to desired height. 58 Door Stop Adjustment 20 21 1 1 90˚ 3 110˚ 120˚ 2 2 Open refrigerator door so door stop and shoulder screw are accessible. Note: Shoulder screw should be in 110˚ door opening position. Final Installation Remove shoulder screw and place in 90˚ or 120˚ position. 22 23 Replace top air grille. 24a Using an 8"magnetic nut driver, replace the two 1/4" screws. 24b designer (Professional) Replace the center grille louver. (Designer) Replace the center grille louver. 59