Viking VRT Installation Instructions - Page 7

Clearance dimensions

Get Viking VRT PDF manuals and user guides View all Viking VRT manuals
Add to My Manuals
Save this manual to your list of manuals

Page 7 highlights

Clearance dimensions The bottom of a standard hood should be 30" (76.2 cm) min. to 36" (91.4 cm) max. above the countertop. This would typically result in the bottom of the hood being 66" (167.6 cm) to 72" (182.9 cm) above the floor. Refer to the rangetop hood installation instructions for additional information. These dimensions provide for safe and efficient operation of the hood. WoodO/Cveormlapyosite Note: Minimum clearance for back wall is 0" with backguard or high-shelf. WoodO/Cveormlapyosite ((7116268672""t..mmo69 accinmmx..)) ((631822..o0647r""ccmm)) (00c"m) 3((3796061""..t24mmoccaimmnx.)). ((7116268672""t..mmo69 accinmmx..)) Wall Installation (763.20"cm) (15.62"cm) 3((3796061""..t24mmoccaimmnx.)). Island Installation Important: This rangetop comes standard with an Island Trim. There must be a minimum of 6" (15.2 cm) clearance from rear of rangetop to a combustible wall. Clearances from non-combustible materials are not part of the ANSI Z21.1 scope and are not certified by CSA. Clearances to non-combustible materials must be approved by the authority having jurisdiction. Note: -6" (15.2 cm) min. with island trim and combustible rear wall. -0" with island trim and non-ombustible rear wall. 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
7
Clearance dimensions
The bottom of a standard hood should be 30” (76.2 cm)
min. to 36” (91.4 cm) max. above the countertop. This would
typically result in the bottom of the hood being 66” (167.6
cm) to 72” (182.9 cm) above the floor. Refer to the rangetop
hood installation instructions for additional information. These
dimensions provide for safe and effi
cient operation of the hood.
66”min.
(167.6 cm)
to
72”max.
(182.9 cm)
66”min.
(167.6 cm)
to
72”max.
(182.9 cm)
24”
(61.0 cm)
or
27”
(38.6 cm)
30”
(76.2 cm)
6”
(15.2 cm)
Wood/Composite
Overlay
Wood/Composite
Overlay
30”min.
(76.2 cm)
to
36”max.
(91.4 cm)
0”
(
0 cm)
30”min.
(76.2 cm)
to
36”max.
(91.4 cm)
Note
: Minimum clearance for back wall is
0” with backguard or high-shelf.
Important
: This rangetop comes
standard with an Island Trim. There
must be a minimum of 6” (15.2 cm)
clearance from rear of rangetop to a
combustible
wall. Clearances from
non-combustible materials are not
part of the ANSI Z21.1 scope and
are not certified by CSA. Clearances
to non-combustible materials
must be approved by the authority
having jurisdiction.
Note
:
-6” (15.2 cm) min. with island trim and
combustible
rear wall.
-0” with island trim and
non-ombustible
rear wall.
Island Installation
Wall Installation