Viking VRT Installation Instructions - Page 9

General Information READ AND FOLLOW ALL WARNING AND CAUTION INFORMATION WHEN INSTALLING THIS APPLIANCE. •All openings in the wall behind the appliance and in the floor under the appliance should be sealed. •Do not obstruct the flow of combustion and ventilation air. Moving, Handling, and Unpacking •Remove and discard all packing materials, including cardboard and tape on the outside of the rangetop. •Remove the burner grates and styrofoam off the top cooking surface. Be sure to remove the burner caps packaged in styrofoam below the burner grates. •Some stainless steel parts may have a plastic protective wrap which must be peeled off. The interior should be washed thoroughly with hot, soapy water to remove film residues and any dust or debris before being used, then rinsed and wiped dry. Solutions stronger than soap and water are rarely needed. Installation Note: Refer to rangetop electrical & gas requirements section for proper installation information. WARNING Moving hazard To avoid risk of severe personal injury; this appliance requires two or more personnel while handling and moving. Possible use of appliance moving devices is recommended. 1 2 Connect gas and electrical in shaded area. See the "Electrical & Gas Requirements" section for more information. Slide rangetop into place. 9