Viper 3002 Owner Manual - Page 24
panic mode
View all Viper 3002 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
The 2-way remote responds with the normal arm/disarm notifications in silent mode. (If the remote has beeps programmed On, the remote will beep.) ➜ panic mode note: On both remotes the panic button is the same color. 2-way remote If you are threatened in or near your vehicle, you can attract attention by triggering the system with your 2-way remote. Just press or button for approximately two seconds, and you will enter Panic Mode. The siren will sound and the parking lights will flash for the programmed siren duration. To stop Panic Mode at any time, press or button on the 2-way remote again. The 2-way LED remote responds with one flash of the Red LED upon entering Panic Mode and two flashes of the Red LED upon exiting Panic Mode. 4-button remote If you are threatened in or near your vehicle, you can attract attention by triggering the system with your transmitter. Just press or for approximately two seconds, and you will enter Panic Mode. The siren will sound and the parking lights will flash for the programmed siren duration. To stop Panic © 2006 directed electronics 25