Viper 4704 Owner Manual - Page 31
System Features - install
![]() |
View all Viper 4704 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
System Features Factory Alarm Trigger Notification: This system has an optional input that can be connected to the horn circuit. If the vehicle has a factory alarm controlled by the lock/unlock keyless entry system, the remote reports when the factory alarm is triggered - the remote screen displays the alarm icon and "alarm door open" displays the text area. Status LED: The Control Center Status LED flashes as a visual indicator that your vehicle's remote start system is locked. Starter Kill: The Failsafe® Starter Kill relay prevents the engine from starting. Note May require additional parts and installation Emergency Override The following procedure bypasses the optional Failsafe Starter Kill when a programmed remote is not available. Number of presses__________ 1. Turn the ignition On. 2. Press the control button on the Control Center the correct number of times (the default is 1 press). 3. After a few seconds the Failsafe Starter Kill is bypassed and you may start your vehicle with a key. Note As a precaution, if programmed for Passive Locking or Auto Re-locking the system should be placed into Valet Mode until a remote is available. 28 © 2011 Directed Electronics. All rights reserved.
![](/manual_guide/products/viper-4704-owner-manual-e5d3db5/31.png)