Viper 480XV Owner Manual - Page 10

note: Your system MUST be installed by an Authorised dealer in accordance with the instructions we supply them. The Viper 460XV system is designed to be installed in any petrol or common rail diesel vehicle with a 12-volt battery. note: The Installation Certificate must be completed by your installer at the authorised dealer. Other than the remote controls, this system has no user-serviceable parts. Your authorised dealer can correct any system wiring problems and, if needed, can return any malfunctioning component to Directed Electronics for repair/replacement under the terms of the Limited Lifetime Warranty printed at the beginning of this guide. note: Making changes to the existing system will invalidate the certificate of installation. ➜ system maintenance This system needs no specific maintenance beyond remote control battery replacement. The LCD remote is powered by a 1.5V AAA battery. The Battery Level indicator has four level indicators that serve as a visual indication of battery charge. When the battery reaches a low charge level that requires replacement, the remote control will generate a single notification chirp, and the Battery Level indicator will flash continuously. FULL REPLACE EMPTY Battery Replacement Gently pull the end of the battery door away from the top of the remote control then slide the door up to expose the battery and remove the expired battery. Place the new battery into the remote © 2005 directed electronics, inc. 11