Viper 480XV Owner Manual - Page 18

When the remote control receives a page it will generate a page notification to the user (notifications are audible beeps and-or vibration) and the LCD Icons will display the current system status. Command Page When a command (arm/disarm, or auxiliary channel) from the remote control is sent and received, the system will send a command page back to confirm receipt. Alarm Page If the alarm system is triggered while armed, an Alarm Page will be sent to the remote control. When the remote receives an Alarm Page, the LCD icons will display the alarm system status information and the remote control will generate beeps and-or vibration. An Alarm Page alert is a series of 5 groups of 4 rapid beeps (ultrasonic sensor, boot, door, ignition, or bonnet trigger) and the LCD icon that caused the alarm will display. This will repeat every 60 seconds to alert the user that the alarm system was triggered and will continue until the alarm page is cleared. Page Recognition (Acknowledgement) To clear a page alert/notification, quickly press any button on the remote control. This can be performed at any time during or after the page notification has occurred. The remote control will not send a command to the system at this time; it will only clear future repeats of the page notification. The next time a button is pressed on the remote control it will send a command to the system. © 2005 directed electronics, inc. 19