Viper 5301 Owner Manual - Page 25
Multi-car control capability - responder le 2
View all Viper 5301 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Placing the system into the remote pair mode: 1. Turn the ignition to the On position. 2. Press, release, then press and hold the Control button (on the Control Center). 3. The Control Center LED begins to flash and the horn honks once to confirm the system is in Pair mode, the Control button can be released. The system will stay in Pair mode for 60 seconds or until the ignition is turned off. The horn will emit one short and one long honk when it exits remote pair mode. Placing the remote into the remote pair mode: 1. Press and hold the button for 8 seconds. If the transmit LED flashes at 3 seconds, disregard and continue to hold. 2. Wait for thAeUX Transmit LED to light solid. Release the button. 3. Press the button for 1AUXsecond. The transmit LED flashes 3 times. 4. Within 5 seconds, press the button. 5. The vehicle horn honks. You have now successfully learned the remote to the vehicle remote start system. 6. Press the button two times to exit learn routine on the remote. The transmit LED turns off and exit. ➢ Multi-car control capability You can use the Responder LE 2- way and 1- way companion remote control system for two cars, with full command capability for both vehicles. While holding a command button and transmitting, the amber LED at the top of the remote control flashes in groups to indicate which car is being controlled. • Car 1: 1 flash • Car 2: 2 flashes © 2011 Directed Electronics. All rights reserved. 17