Vivitar S137 Camera Manual - Page 7
SD Memory Card
View all Vivitar S137 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
B. Charge the battery using the USB connection cable (included) and the AC Charger (included): - Connect one end of the USB cable into the USB port on your camera. - Connect the other end of the USB cable to the AC Charger and then plug the AC Charger into a power socket. - The charge light will turn off when the battery is fully charged. NOTE: Some camera features will not work if the battery power level is low. When the battery power is low the battery icon turns red and the camcorder automatically turns off a few seconds later. The energy status of the power is displayed on LCD as shown below: Full battery power Medium battery power Low battery power SD Memory Card Make sure an SD card has been properly inserted into your camera. (SD card not included.) To properly insert the SD Card: Push the SD card into the slot in the direction shown on the camera (see SD icon by the SD card slot). Push the SD card until you hear a slight clicking sound. This indicates the SD card has been inserted correctly. 6