Vizio E320VT E320VT User Manual - Page 34
Arrow, Picture, Noise Reduction, Medium, Fast Response, Left/Right, Ambient Light Sensor, Reset
View all Vizio E320VT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
6 E320VT / E370VT / E420VT Adjusting the Noise Reduction Setting Noise reduction diminishes artifacts such as "blockiness" or "pixellation". When activated, the resulting picture usually has softer edges. To adjust the noise reduction setting: 1. Press the OK button on the remote. The on-screen menu is displayed. 2. Use the Arrow buttons to highlight Picture and press OK. 3. Use the Arrow buttons to highlight Noise Reduction and press OK. 4. Use the Arrow buttons to highlight Off, Low, Medium, or High, then press OK. 5. Press EXIT. Enabling or Disabling Fast Response Enabling the Fast Response setting can often improve PC and console gaming experiences. To enable or disable Fast Response: 1. Press the OK button on the remote. The on-screen menu is displayed. 2. Use the Arrow buttons to highlight Picture and press OK. 3. Use the Arrow buttons to highlight Fast Response. 4. Use the Left/Right Arrow buttons to change the setting to Off or On. 5. Press EXIT. Enabling or Disabling the Ambient Light Sensor When enabled, the ambient light sensor detects the light levels in the room to optimize the brightness of the TV's backlight. When the ambient light sensor is enabled, you will be unable to manually change the TV's brightness settings. To enable or disable the ambient light sensor: 1. Press the OK button on the remote. The on-screen menu is displayed. 2. Use the Arrow buttons to highlight Picture and press OK. 3. Use the Arrow buttons to highlight Ambient Light Sensor. 4. Use the Left/Right Arrow buttons to change the setting to High, Low, or Off. Picture Picture Mode Noise Reduction Fast Response Ambient Light Sensor Reset Picture Mode High 5. Press EXIT. Resetting the Picture Settings To restore the TV's picture settings to the factory dAemfbaieunlttLsig:ht Sensor 1. Press the OK button on the remote. The on-screen menu is displayed. 2. Use the Arrow buttons to highlight LAST EXIT Picture and press OK. 3. Use the Arrow buttons to highlight Reset Picture Mode, then press OK. 4. Use the Arrow buttons to highlight OK and press OK. 5. Press EXIT. 26