Vizio GV47LF User Guide - Page 47
DTV Tuner Setup - 47
View all Vizio GV47LF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
VIZIO GV47L FHD TV User Manual 4.7 DTV Tuner Setup When you first used your GV47LHDTV you will have setup your TV for DTV channels using the Initial Setup screens. If you did not do this or if your setup has changed, you can do this from the TV TUNER SETUP menu. 4.7.1 Tuner Mode When the MENU button is pressed, the On Screen Display (OSD) appears on the PICTURE ADJUST page. Press the button to display the TV TUNER SETUP page for DTV. Press the selection. button to highlight the Tuner Mode Press the button to choose Cable or Air (Antenna) depending upon which equipment you have attached to the DTV / TV Input. 4.7.2 Auto Search Press the selection. button to highlight the Auto Search Press the button to Auto Search for TV channels available. The TV will automatically search for analog and digital channels. 4.7.3 Skip Channel After the TV has stored all of the available DTV channels in memory you will find that some channels will be too weak to watch comfortably or they may be channels you do not want to see. Select the channel you wish to remove, press the MENU and buttons to open the TV TUNER SETUP menu and then press the button to highlight SKIP CHANNEL. Press the OK button to select this channel to be skipped when using the CH+ or CH- button. You will still be able to select this channel using the number buttons on the remote control. 4.7.4 Digital Audio Out When receiving digital audio from the DTV / TV Input, the audio is output on the Optical Digital Audio connector of the rear of the TV. To configure the output for your Receiver/Amp, press the button to highlight the Digital Audio Out selection. Press the button to select Dolby Digital or PCM. Version 5/18/2007 47 www.VIZIOCE.com