Vtech 1856 User Manual - Page 10
Tabletop installation
![]() |
UPC - 650530015977
View all Vtech 1856 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Getting started Installation options 3. Connect the telephone line cord and power adapter to the jacks on the back of the telephone base. Bundle the telephone cord, and secure it with a twist tie before placing it inside the bracket. 4. Plug the power adapter into an electrical outlet not controlled by a wall switch. Plug the telephone line cord into a telephone wall jack. To mount the telephone on the wall, position the mounting holes and over the telephone outlet mounting studs. Press and slide the bracket down firmly so the telephone is held securely on the telephone outlet mounting studs. Tabletop installation To return the bracket from the wall mounting to tabletop position, follow the directions below. 1. Remove the telephone base from the wall. Unplug the cords from the wall jacks. Remove the bracket from the telephone base. 2. Rotate the bracket to tabletop positon, insert the bracket tabs into slots and on the telephone base, then press the other bracket tabs into slots and . 3. Route cords through slots. Plug the other end of the telephone line cord into a telephone wall jack. Plug the large end of the power adapter into an electrical outlet not controlled by a wall switch. 7
![](/manual_guide/products/vtech-1856-user-manual-9ad5420/10.png)