Vtech 2-Line Four Handset Expandable Cordless Phone with Digital Answering Syste - Page 36
Temporary tone dialing, Handset locator
View all Vtech 2-Line Four Handset Expandable Cordless Phone with Digital Answering System and Caller ID manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Telephone operation Temporary tone dialing The dial mode is preset to tone. If you do not have touch-tone service, you need to change the setting to pulse (page 13 and 18). If you have pulse (rotary) service, you can change from pulse to tone dialing during a call by pressing TONE on the handset or telephone base. This is useful if you need to send touchtone signals to access telephone banking or long distance services. Once you have initiated your call by dialing the phone number in pulse (rotary), press TONE on the handset or telephone base. Now, all subsequent key presses will be sent as touchtone signals. After you hang up the call, the phone returns to pulse (rotary) dialing for the next call. Handset locator This feature helps you find a misplaced handset. To start paging: 1. Press the MENU softkey when the telephone base is not in use. 2. Press /CID or /DIR to select Page all HS, then press the SELECT softkey on the telephone base. The telephone base shows Paging all handsets and the handset shows **Paging**. Call log Page all HS Intercom SELECT To end paging: • Press the STOP softkey on the telephone base. -OR- • Press OFF, , , , INT, /CID, /DIR, REDIAL/PAUSE, HOLD or any dialing keys (0-9, #, TONE ) on the handset. 32