Vtech 2-Line Four Handset Expandable Cordless Phone with Digital Answering Syste - Page 6
Telephone base installation
View all Vtech 2-Line Four Handset Expandable Cordless Phone with Digital Answering System and Caller ID manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Getting started Telephone base installation If you have a 2-line wall jack, install the telephone base as shown in Figure One: Installation with 2-line jack on below. If you have separate wall jacks for each line, install the telephone base as shown in Figure Two: Installation with separate line jacks on page 3. Make sure that the electrical outlet is not controlled by a wall switch. If you subscribe to digital subscriber line (DSL) high-speed Internet service through your telephone line, you must install a DSL filter between each telephone line cord and telephone wall jack. The filter prevents noise and caller ID problems caused by DSL interference. Contact your DSL service provider for more information about DSL filters. Figure One: Installation with 2-line jack Electrical outlet not controlled by a wall switch Telephone base power adapter L1+L2 telephone wall jack If you have DSL high-speed Internet service, a DSL filter (not included) is required. Connect the black telephone line cord to jack labeled LINE 1/L1+L2. Telephone base