Vtech CS5111-2 User Manual (CS5111-2 User Manual) - Page 7
Mounting bracket installation
UPC - 735078013477
View all Vtech CS5111-2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Getting started Mounting bracket installation Your telephone base comes with the mounting bracket installed, ready for desktop use. You may also mount your telephone onto a standard telephone wall plate. Wall mounting bracket installation: To prepare the telephone base for wall mounting, you will need to remove the bracket if it is currently attached for desktop use. Press on the tabs located on the legs of the bracket to loosen, then lift the bracket up and away from the telephone base. AC 7.5V Mounting bracket in wall mount orientation 1. First, insert the lower portion tabs of the mounting bracket into the lower grooves in the telephone upper portion tabs base, then snap the upper portion tabs of the Mounting bracket mounting bracket into place. 2. Mount the telephone base on the wall by positioning it so the mounting studs will fit into the holes on the telephone base and mounting bracket. Slide the telephone base down on the mounting studs until it locks into place. lower portion tabs 3. To remove the bracket, press both upper portion lower groove tabs firmly inward and pull the bracket downward until it releases from the grooves. upper grooves www.vtechphones.com