Vtech CS5111 User Manual (CS5111 User Manual) - Page 9

Telephone settings Date and time If you subscribe to caller ID service, the date and time is set automatically with the next incoming call. If you do not have caller ID service, you can set the date and time manually. 1. Press PROG when the handset is not in use. 2. Press or until DATE/TIME is displayed. Press SELECT. 3. When the month is flashing, press or until the screen displays the correct month and then press SELECT. 4. When the date is flashing, press or until the screen displays the correct date and then press SELECT. 5. When the hour is flashing, press or until the screen displays the correct hour and then press SELECT. 6. When the minute is flashing, press or until the screen displays the correct minute and then press SELECT. 7. When AM or PM is flashing, press or to choose between AM or PM and then press SELECT. You will hear a confirmation tone. • When there is a power failure, the time may need to be reset. Ringer You can select from different ringers. 1. Press PROG when the handset is not in use. 2. Press or until the screen displays RINGER: and the current setting. 3. Press SELECT. The current setting flashes, and you will hear a sample of the ringer. 4. Press or to select RINGER: 1, 2, 3, or 4. You will hear a sample of each ring tone. 5. Press SELECT to confirm your selection. You will hear a confirmation tone. Ringer volume You can change the ringer volume to a comfortable level or turn the ringer off. 1. Press PROG when the handset is not in use. Press or until the screen displays RINGER VOL: and the current setting. 2. Press SELECT. The current setting flashes, and you will hear a sample of the ringer volume. 3. Press or to select ringer volume from OFF, LOW or HI. You will hear a sample of the selected volume level.