Vtech DS6322 User Manual (DS6321-3 User Manual) - Page 19

Bluetooth Pair a cell phone (continued) 8. Enter the PIN of the telephone base (the default PIN is 0000) into your cell phone to continue the pairing process. 9. When a device is successfully connected, the handset displays Paired with cellular and then Cellular setup completed Device connected. The corresponding status icon ( 1 or 2) displays. The corresponding device light on the telephone base (DEVICE1 or DEVICE2) turns on. • When you already have two devices on the active devices list, the handset shows Maximum of 2 devices can be connected. You are prompted to replace an existing device on the active devices list (page 21). Base name: VTech DS6321 PIN:0000 Cellular setup completed Device connected • The pairing process may take up to one minute. If the pairing process fails, try again. • If you put the handset back in the telephone base or charger while pairing, the process discontinues and the handset returns to idle mode. Auto connection When a device is successfully paired with the telephone base but not connected, the handset displays Cellular setup completed Device not connected and then Auto- connect function enabled Press SELECT. You can press MENU/SELECT to exit. You can connect a device manually (page 20). Cellular setup completed Device not connected Auto-connect function enabled Press SELECT 15