Vtech Kidizoom Smartwatch - Pink User Manual - Page 8

TO BEGIN USING Kidizoom® Smartwatch When the clock is displayed on screen, press the home button to go to the home menu. Press the shutter button to take photos and videos. Note: • If the battery level is too low and cannot keep the clock running, you will need to enter the time and date again after recharging. • When the battery level is low, only the clock display function is available. We recommend recharging the battery as soon as possible before further use. AUTOMATIC SCREEN OFF To preserve battery life, the screen will automatically shut off after a short period of time when in clock mode. Note: The auto screen off time can be set in Settings / Advanced / Auto Screen Off. Please refer to the Settings section in this manual. In other activities, it will return to clock mode automatically if there is no input for 1 minute. When in camera mode, it will auto exit after 3 minutes. When in slideshow, the auto exit time is 15 minutes. If you have a timer running, it will return to the timer screen instead of watch mode. The watch will not shut off automatically when the timer is running. BATTERY STATUS The remaining battery capacity will be displayed on the main menu screen. When the battery level is low, only the clock display function is available. It is recommended to recharge the battery before further use. When the battery level is too low, the watch will not turn on until it is charged. CONNECT TO A COMPUTER FOR FILE TRANSFER You can connect Kidizoom® Smartwatch to a PC or Mac computer using the included micro USB cable. Once connected, you can transfer files between the watch and computer. Please follow the following steps to make the connection: • Pull up the rubber cover of the micro USB port on the side of your watch. • Insert the micro USB cable (small end) into the micro USB port on the watch. • Insert the larger end of the micro USB cable into a USB port on the 8 computer. A USB port is usually marked with this symbol .