Vtech Kidizoom User Manual - Page 5

Getting Started - digital camera

Page 5 highlights

Getting Started PRODUCT SPECIFICATIONS Display: 1.5" CSTN color LCD Photo Resolution: 640x480 Memory: 64MB built-in memory (approximately 45MB free memory for photos) Store up to 500 photos (photo size = 640x480 resolution in JPEG format) Supported File Formats: JPEG Supported Hardware: USB cable (included) for computer connection Zoom: 2X digital zoom GETTING STARTED BATTERY INSTALLATION Note: Adult assembly is required for battery installation. Tools required for battery installation: Phillips screwdriver (not included). • Make sure the camera is turned OFF. • Locate the battery cover on the bottom of the camera. Loosen the screws using a screwdriver and remove the battery cover. • Install 4 new "AA" batteries (2 on each side) as illustrated above. (The use of new, alkaline batteries is recommended for maximum performance.) • Replace the battery cover and tighten the screws. Do not over-tighten screws. Note: If Kidizoom Camera™ is not working properly after the batteries have been replaced, press the Reset Button and then restart the camera. Note: The photos stored in the camera's memory will not be affected by resetting the camera. However, you will need to select the camera's language setting again, and the volume setting will return to the default level. 

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18

±
PRODUCT SPECIFICATIONS
Display:
1.5” CSTN color LCD
Photo Resolution:
640x480
Memory:
64MB built-in memory (approximately 45MB free memory for
photos)
Store up to 500 photos (photo size = 640x480 resolution in JPEG
format)
Supported File Formats:
JPEG
Supported Hardware:
USB cable (included) for computer connection
Zoom:
2X digital zoom
GETTING STARTED
BATTERY INSTALLATION
Note:
Adult assembly is required for battery installation. Tools required
for battery installation: Phillips screwdriver (not included).
• Make sure the camera is turned OFF.
• Locate the battery cover on the bottom of the camera. Loosen the
screws using a screwdriver and remove the battery cover.
• Install 4 new “AA” batteries (2 on each side) as illustrated above.
(The use of new, alkaline batteries is recommended for maximum
performance.)
• Replace the battery cover and tighten the screws. Do not over-tighten
screws.
Note:
If
Kidizoom Camera
™ is not
working properly after the batteries
have been replaced, press the Reset
Button and then restart the camera.
Note:
The photos stored in the
camera’s memory will not be affected by resetting the camera. However,
you will need to select the camera’s language setting again, and the
volume setting will return to the default level.
Getting Started