Vtech SN5147 User Manual - Page 65
Expand your telephone, system
View all Vtech SN5147 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
• If you do not press any key within 20 seconds, the remote access call automatically disconnects. • When the answering system memory is full, the telephone announces, "Memory is full. Enter the remote access code." • When the answering system is turned off, the telephone answers after 10 rings, and announces, "Please enter your remote access code." Set your remote access code You can set your own remote access code from 00 to 99. 1. Press MENU on the cordless handset in idle mode to enter the main menu. 2. Press q or p to choose Answering sys and then press SELECT. 3. Press q or p to choose Ans sys setup and then press SELECT. 4. Press q or p to choose Remote code and then press SELECT. 5. Press the dialing keys (0-9) to enter the code, or q or p to select from 00 to 99, then press SELECT to save. You hear a confirmation tone. Expand your telephone system Add and register expansion handset You can add new cordless handsets (SN5107, purchased separately) to expand your telephone system. Your telephone base supports a maximum of four cordless handsets. Additional handsets are assigned numbers in the sequential order. Charge the new handset without interruption for at least 30 minutes before registering it to he telephone base. After charged, each expansion handset displays To register HS, see manual. • You cannot register a handset if any other system device is in use. • Only one handset can register to the telephone base at a time. To register a SN5107 handset: 1. When the telephone is not in use, press and hold PAGE at the telephone base for about five seconds until the visual ringer indicator light turns on. Release PAGE. 2. Press the pound (#) key on the handset. The handset displays Registering... Please wait. The handset show Registered and you hear a beep when the registration process completes. The registration process takes about 60 seconds to complete. If the registration fails, the handset displays Registration failed, and then To register HS, see manual. Remove the handset from the charger and repeat the registration process again. 59