Vtech VCS754 Administrator and Provisioning Manual - Rev 4 - Page 104
network Module: Network Settings, General configuration file settings
View all Vtech VCS754 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
VCS754 Administrator and Provisioning Manual "network" Module: Network Settings The network settings follow the format: network.[element]. General configuration file settings Setting: network.rtp.port_start Description: Sets the Local RTP port range start. Values: 1-65535 Default: 18000 Setting: network.rtp.port_end Description: Sets the Local RTP port range end. Values: 1-65535 Default: 19000 Setting: network.vlan.wan.enable Description: Enables or disables the WAN VLAN. Values: 0 (disabled), 1 (enabled) Default: 0 Setting: network.vlan.wan.id Description: Sets the WAN VLAN ID. Values: 0-4095 Default: 0 Setting: network.vlan.wan.priority Description: Sets the WAN port priority. Values: 0-7 Default: 0 Setting: network.lldp_med.enable Description: Enables or disables LLDP-MED. Values: 0 (disabled), 1 (enabled) Default: 1 Setting: network.lldp_med.interval Description: Sets the LLDP-MED packet interval (in seconds). Values: 1-30 Default: 10 Configuration File Parameter Guide 104 Back to Contents