Vtech i5868 User Manual - Page 8
Registration
UPC - 735078006875
View all Vtech i5868 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Getting Started Registration Registering the i 5807 Handset for the first time After charging, the screen on the Handset will display: Register If your Base Unit is model number i 5866: 1) Find the Base ID Code on the underside of the Base Unit. 2) Enter the 15-digit Base ID Code into the Handset. If you make a mis take, press the left NavKey to backspace or press the right softkey to erase a character. 3) Press OK to complete the registration process. If your Base Unit is model number i 5853 or i 5867, find the BASE ID Code (Base must be OFF) and register the Handset by: 1) At the Base, press MENU. 2) Scroll down to DISPLAY BASE-ID, then press OK. 3) Enter the 15-digit Base ID Code into the Handset. If you make a mistake, move the joystick to the left ( ) to backpace or press the right softkey to erase a character. 4) Press OK to complete the registration process. NOTE: If the Handset, after charging, says "Searching for Base...", press the NEW soft key. "Enter Base ID" will now be displayed. Follow the steps above. Wait approximately 15-60 seconds. You will hear confirmation beeps from the Base and Handset. The newly registered Handset will now be assigned the lowest extension number not previously assigned to a different system Handset (1 - 6). If you do not enter the correct digit sequence, you will see Invalid Base ID! and hear an error tone. Press the left NavKey to backspace or press the right softkey to erase a character, and carefully re-enter the Base ID Code following the above directions. NOTE: The 15-digit BASE ID Code may contain numbers and characters, such as *. Make sure you carefully enter all 15 digits. 8