Vtech vt1962 User Manual - Page 19

QUICK REFERENCE GUIDE Set-Up • Plug AC adapter into a standard electrical outlet and Base Unit • Set Dial Mode switch to PULSE or TONE. The unit is factory set to TONE. • Let the Handset battery pack charge for 16 hours before first use. • Connect telephone line cord to Base Unit and telephone jack. Making Calls • Press the PHONE key. When the "PHONE ON" indicator is displayed and you hear a dial tone, dial the number. OR • Enter the number to be dialed on the LCD and then press the PHONE key. Answering Calls • To answer a call, press any key other than OFF , MUTE , or the Volume Keys. The Handset will NOT auto-answer when lifted off the Base cradle. Hanging Up • Press OFF or place the Handset in the cradle to hang up a call. To Place A Call On Hold • Press HOLD on the Handset to place an active call on hold. Press HOLD again to return to the call. To Mute A Call • Press MUTE to disable the Handset microphone. • Press MUTE again to return to normal two way conuersation. To Page The Handset • To page from the Base, press PAGE . • To cancel the PAGE either press PAGE again on the Base or press OFF on the Handset. Storing Memory (SPEED) DIAL NUMBERS: • The phone should be OFF. • Enter the number you wish to store on the LCD up to a maximum of 20 digits. Storing The Phone should be OFF Enter Phone number Press You will see Enter Memory location (01-20) • Press PROG . The LCD will display "PROGRAM LOCATION " • Enter a two digit memory location (01 .. 20), the unit will store the number, emit a happy tone to confirm successful programming and exit program mode. 19