Waring BB155 User Manual - Page 4
Grounding Instructions - commercial blender
View all Waring BB155 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
GROUNDING INSTRUCTIONS • For your protection, Waring® Commercial Blenders are equipped with a 3-conductor cord set. • 120 volt units are supplied with a molded 3-prong grounding-type plug and should be used in combination with a properly connected grounding-type outlet, as shown in Figure 1. If a grounding-type outlet is not available, an adapter, shown in Figure 2, may be obtained to enable a 2-slot wall outlet to be used with a 3-prong plug. Referring to Figure 3, the adapter must be grounded by attaching its grounding lug under the screw of the outlet cover plate. CAUTION: Before using an adapter, it must be determined that the outlet cover plate screw is properly grounded. If in doubt, consult a licensed electrician. Never use an adapter unless you are sure it is properly grounded. NOTE: Use of an adapter is not permitted in Canada. 4