Waring BB155 User Manual - Page 5

BLENDER JAR ASSEMBLY INSTRUCTIONS 1. When assembling blade assembly to jar, beware of the blades as they are very sharp. 2. Position rubber seal over blade assembly so that it sits in between the flats of the blade assembly and the jar. 3. Insert blade assembly with rubber seal into the bottom hole of the jar. NOTE: To avoid leaking while blending, be sure the rubber seal is positioned in between the blade assembly and the jar. HINT: Assembling the jar is easier when the bottom of the jar is facing up. 4. Screw the collar clockwise onto the jar until it tightly secures the blade assembly and seal to the jar. BB155 OPERATION 1. Before starting, make sure that the blender is unplugged. 2. Always be sure container is properly assembled before adding ingredients. 3. Put ingredients into container and cover it. Do not fill above MAX FILL line. 4. With the switch in the OFF position, place container on blender base. Be sure container is fully seated and that drive coupling is properly engaged. Plug blender cord into outlet. 5. This blender has 2 speed settings: HI and LO. Press toggle switch to desired position. To crush ice, always use HI speed setting. 5